Need help?Do you have a question about the Keithley 2303 and is the answer not in the manual?
General| Output Voltage Range | 0 to +15 V |
|---|---|
| Load Regulation | <0.01% + 2mV |
| Line Regulation | <0.01% + 2mV |
| Programming Resolution Voltage | 1 mV |
| Interface | USB |
| Storage Temperature Range | -40°C to 70°C |
| Voltage Programming Accuracy | 0.05% + 5 mV |
| Voltage Readback Accuracy | 0.05% + 5 mV |
| Operating Temperature Range | 0°C to 40°C |
Details warranty coverage, exclusions, and terms for the instrument.
Outlines safety procedures, user roles, hazard awareness, and safe practices for instrument operation.
Specifies requirements like environment, warm-up, and equipment before performing verification tests.
Details tests for output voltage, readback, current, and DVM input accuracy.
Covers calibration setup, front panel, remote procedures, and management.
Describes managing codes, dates, detecting errors, and step completion.
Details safe disassembly, handling, cleaning, and reassembly of the instrument.
Lists ordering, service, and parts details for digital, analog, display, and mechanical components.
Details DC voltage/current output, DVM input, and general specifications.
Details calibration commands, error detection, and BASIC calibration programs.
Explains front panel control and IEEE-488 bus commands for instrument operation.
To Next Page
