Introduction
The Model 7705 40-Channel Single-Pole Control Module has 40 channels of independent switching. These
channels control power to the device under test (DUT) and switching loads. They can also directly control
equipment such as light indicators and relays.
Figure 1: Model 7705 40-Channel Single-Pole Control Module
Item shipped may vary from model pictured here.
The 7705 includes the following features:
▪ Forty independent Form A switches
▪ Two 50-pin D-sub connectors for use with the Model 7788 50-Pin D-Subminiature Connector Kit
▪ A Model 7788 50-Pin D-Subminiature Connector Kit, which includes two D-sub connectors
The 7705 switching module can be used with the DAQ6510 Data Acquisition and Multimeter System.
If you are using this switching module with the 2700, 2701, or 2750, please see Model 7705 Control
Module User's Guide, Keithley Instruments document number PA-696.
To Next Page
Need help?
General
