Keli Sensing Technology D2008type - 3.7 Delete Operation for Weighing Record and Vehicle Tare; 3.8 Inquiry and Print; 4 Information Tips; 4.1 Normal Information Tips

6
as per date
5
PRESS【ENTER】
no 0001
Show first record
6
PRESS【ENTER/↓】
d12.05.31
show first record date
7
PRESS【ENTER/↓】
t09.58.44
show first record date
8
PRESS【ENTER/↓】
o 12345
show first record vehicle number
9
PRESS【ENTER/↓】
hn 003
show first record cargo number
10
PRESS【ENTER/↓】
A001.200
show first record gross weight
11
PRESS【ENTER/↓】
t000.200
show first record tare
12
PRESS【ENTER/↓】
A001.000
show first record net weight
13
PRESS【ENTER/↓】
no 0001
Back to first record
Note:step 5-step 12,if the current weigh record do not have【REPRINT】,it will display【Err 17】,otherwise, clear
the weigh record. If press【←】will check the latest full weigh record, press 【→】will check before full weigh
record.
Step6:if press【clean】,if the current weigh record still do not have【REPRINT】,it will display【Err
17】,otherwise will clean all weigh record for this date.
3.7 Delate operation for weighing record and vehicle number tare
Step
Operation
Display
Explanation
1
press【CLEAN】
S-CodE
Enter code
2
press【111111】
S- - - - - -
Fix code“111111”
3
press【ENTER】
SurE 0
Choose function number
1.Delate all complete record and uncompleted record
2.Delate all vehicle number tare
3.Delate all uncompleted record
4
press【1】
SurE 1
Choose to delete all complete record and uncompleted
record
5
press【ENTER】
----
PASS
Deleting….
finished, return to【weighing display】
3.8. Inquiry and print
The indicator can print out the record which is being inquiried, the operation is as below: during inquiring and
when displaying any one record , press 【Reprint】 to print out this inquired record. The number is 0.
4. Information tips
4.1 normal information tips
number
display
Explanation
1
【 ------- 】
please wait, the inner part of indicator is under calculating,
don’t make any operation
2
【 Print 】
the data is connecting between indicator and printer.
3
【 Load 】
the first data storing between the 2 times of weighting
4
【 End 】
Operation end
5
【 PASS】
Setting changed successfully
6
【Lo bAt】
Low power, will power off
7
【 -】
Voltage is under 10.2V,please recharge in time
8
【 SAVE 】
Data saving
4.2.wrong operation information tips:
number
display
Explanation
1
【Err 03】
overloading warning, must unload all or part of loading.
2
【Err 08】
no record under this condition
3
【Err 11】
storing space is full with vehicle no., please delete part or all
of stored tare
4
【Err 12】
can not print the form of record by mini printer.or POS