Keller W2200 Series - TOOLS AND MATERIALS NEEDED FOR INSTALLATION

3
TOOLS AND MATERIALS NEEDED FOR INSTALLATION
ADDITIONAL MATERIALS NEEDED:
3" Lag Screws (optional)
16d Nails
8d Nails
1 x 4 temporary support slats (2
pieces approximately 32" long)
Braces with same
dimensions as joists
1/4" or 3/8" plywood for shims
TOOLS NEEDED:
Hammer
Ladder
Philips-head screwdriver
Slot-head screwdriver
Square
Tape Measure
Saw