Kellfri 35-VKMATVF - Parts 35-VKMATVF; ATV Compatibility and Setup Notes


Table of Contents
PARTS 35VKMATVF
Attachment device.
Screws and nuts are tted to the attachment
device on delivery.
Pins.
Used for attaching the
attachment device to the
ATV.
Side shift adjustment seen
from above.
The images show the side shift
adjustment from various angles.
Important! Our machine is suitable for the majority of ATV models, thanks to the universal
attachment included. NOTE: Final adjustment by the customer may be necessary.
Recommended ATV size: 500 cubic metres and larger.
Clear advantage if ATV has four-wheel drive.
If necessary add counterweight to rear part of ATV and insert front springs*.
Remember that steering ability is aected if ATV does not have servo.
Install cutting unit as close to the machine as possible.
If there are sharp turns during work, the equipment must be raised.
Ground clearance varies among models.
If using side shift adjustment, steer side shift adjustment towards centre when lifting.
*Ask your ATV dealer.