Table of Contents
Kellfri designs and supplies ecient, aordable machinery and components for forestry,
agriculture, construction and gardening in Sweden, the rest of the Nordic region and Europe.
We recommend that you always read and follow the safety instructions and the instructions
in the machine’s instruction manual.
Kellfri is not liable for any errors in this document.
TABLE OF CONTENTS
Introduction 3
Product information 3
Safety instructions 4
Instructions for emergency situations 4
Personal protection 4
Surroundings 5
Before use 5
Environment 5
Use 6
After use 6
Maintenance and service 7
Transportation and set-up 7
Recycling 7
Risks and hazards associated with the use of garden machinery 8 - 9
Warning labels 10
Chemicals 11
Connecting 12
Handle fuel with caution 12
Parts 35-VKMATVF 13
Installation 14 - 15
Exploded diagrams and materials list 16 - 21
Grease points 22
Deviation form 23
Warranty terms and conditions 24
Important! Our machine is suitable for the majority of ATV models, thanks to the
universal attachment included. NOTE: Final adjustment by the customer may be necessary.
Recommended ATV size: 500 cubic metres and larger.
Clear advantage if ATV has four-wheel drive.
If necessary add counterweight to rear part of ATV and insert front springs*.
Remember that steering ability is aected if ATV does not have servo.
Install cutting unit as close to the machine as possible.
If there are sharp turns during work, the equipment must be raised.
Ground clearance varies among models.
If using side shift adjustment, steer side shift adjustment towards centre when lifting.
*Ask your ATV dealer.
To Next Page
Loading...
