EasyManuals Logo

Kelvinator KC900ESS User Manual

Kelvinator KC900ESS
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Replacing the oven light (Fig. 2)
(NOT COVERED BY THE APPLIANCE
WARRANTEE)
Disconnect the appliance from the electricity
supply.
Remove the protective glass light-cover by
twisting anticlockwise.
After replacing the bulb B, refit the protective
cover A.
NOTE: the glass cover may be tight and may
therefore require a tight grip to release.
Removing the oven door (fig. 1)
To make it easier to clean the oven, the door may
be removed.
The hinges "A" are fitted with two mobile U-bolts "B"
which block the door when it is completely open
if they are hooked onto sections "C" of the hinges.
After this has been done, the door must be lifted up
and taken out. When carrying out this operation,
hold the sides of the oven door beside the hinges.
To refit the door first slide the hinges into their
grooves.
Lastly, before closing the door do not forget to detach
the two mobile U-bolts "B" which were used to hook
the two hinges.
Fig. 1
Fig. 2
12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kelvinator KC900ESS and is the answer not in the manual?

Kelvinator KC900ESS Specifications

General IconGeneral
BrandKelvinator
ModelKC900ESS
CategoryOven
LanguageEnglish