What to do if my Kelvinator Refrigerator is too warm?
If your Kelvinator Refrigerator is too warm, the thermostatic control might be set incorrectly, products might not be cold enough or placed wrongly, or the door isn't closing tightly. Try setting the thermostat knob to a higher position. Ensure products are placed appropriately. Check that the door closes well and the gasket is undamaged and clean.
Why is my Kelvinator KHBF336HWF Refrigerator freezer too warm?
If your Kelvinator Refrigerator freezer is too warm, it could be due to an incorrectly set thermostatic control, the door not closing tightly, placing a large quantity of products to be frozen inside, or products being too close together. Adjust the thermostat knob to a higher setting. Ensure the door seals properly and the gasket is clean. Wait a few hours before checking the temperature again. Arrange products to allow cold air to circulate.
What to do if there is too much frost and ice in my Kelvinator KHBF336HWF?
Excessive frost and ice in your Kelvinator Refrigerator may be due to products not being wrapped properly, doors not shutting tightly, or the thermostatic control being set incorrectly. Verify that the doors seal well and the gaskets are clean and undamaged. Adjust the thermostat knob to a position that gives a higher temperature.
What to do if water flows at the back plate of my Kelvinator Refrigerator?
Water flow at the back plate, into the chamber, or onto the floor of your Kelvinator Refrigerator is often normal due to automatic defrosting. However, the chamber outlet may be clogged, products might be preventing water flow, or the melting water outlet may not be positioned correctly. Clean the outlet. Reposition products to avoid direct contact with the back plate. Ensure the melting water outlet is directed into the evaporative tray. Wrap the products better.
Why is my Kelvinator Refrigerator compressor running constantly?
Your Kelvinator Refrigerator's compressor might be running constantly because the doors aren't closing properly, a large quantity of products to be frozen were put in, too warm food was placed inside, the appliance is in a warm location, or the plug isn't properly connected. Ensure the doors close tightly and the gaskets are clean. Allow a few hours for the temperature to stabilize. Only put food at a maximum room temperature inside. Try to lower the room temperature where the refrigerator is.
Why is my Kelvinator KHBF336HWF Refrigerator not working at all?
Your Kelvinator Refrigerator may not be working because the fuse has burnt out, the thermostatic control is not turned on, or there is no voltage in the mains socket. Connect the mains plug properly. Replace the fuse. Start the appliance according to instructions in chapter „Putting it into use”. Call an electrician.
How to fix a noisy Kelvinator KHBF336HWF Refrigerator?
A noisy Kelvinator Refrigerator may not be supported properly. Check if the appliance stands stable and that all four feet are on the floor.
General| Brand | Kelvinator |
|---|---|
| Model | KHBF336HWF |
| Category | Refrigerator |
| Language | English |
General safety rules for appliance operation and user safety, including cord handling and electrical safety.
Safety measures to protect children from suffocation from packaging and hazards of playing with the appliance.
Guidelines for safe and proper installation, including placement and ventilation to prevent hazards.
Specific warnings regarding the use of isobutane refrigerant, emphasizing ventilation and handling.
How to adjust and manage the temperature settings for optimal cooling performance.
Guidance on operating the refrigerator section, including air circulation and food placement.
Instructions for effective use of the freezer compartment for freezing and storage.
Procedures and tips for freezing fresh food items correctly, including quantity limits.
Guidance on identifying and resolving common operational problems and issues.
Initial checks and actions to take when the appliance exhibits unusual behavior or fails to operate.
Procedures and considerations for the correct installation of the appliance.
Information and requirements for safely connecting the appliance to the electrical supply.
To Next Page