Kodiak
Supercharged LSA Marine Engine
Critical Fuel System
Installation Instructions
For the Builder/Installer
KEM Equipment Inc. would like to congratulate you on your decision to recommend the
Supercharged LSA Marine engine to your valued customer.
The Kodiak 6.2L LSA Supercharged Marine fuel system, once properly set up, will give
your customer many years of trouble free service.
The Fuel System Installation Instructions need to be read and followed prior to start up
and operation of the 6.2L Supercharged Marine Engine. Failure to follow these
instructions during set up of the Fuel System may result in a catastrophic failure of the
Engine and may also VOID the Engine warranty.
Below are some specific installation procedures and guide lines that need to be followed
very closely to complete the installation of the fuel system for the 6.2L Supercharged
LSA Marine engine.
If you are unsure of, or need assistance with these instructions, feel free to call
KEM Equipment at 503-692-5012
WARNING: Gasoline is highly flammable and under pressure. It should not
be exposed to open flame, sparks, or hot engine components. Allow the engine to
cool to ambient temperature prior to performing fuel system modifications or fuel
system maintenance.
WARNING: FOLLOW INSTRUCTIONS Read this entire manual and all other
publications pertaining to the work to be performed before installing, operating,
or servicing this equipment. Failure to follow instructions can cause personal
injury and/or property damage.
To Next Page
Loading...
Need help?
General
