1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard SE0209_VS • 9/12/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
Overview
KEMET’s VS vibration sensors can detect vibrations in a
wide frequency range from 10 Hz up to 15 kHz, through
the effective conversion of vibrations to electrical signal
by utilizing proprietary optimized piezo ceramic material
and original vibration amplifying design. As no amplier is
required, it makes it very easy to embed.
Its ability to detect even the faintest levels of vibration
throughout a large sensing bandwidth makes it ideal for
predictive maintenance and process control operations
in industrial IoT, allowing for correction and data analysis
ow to PLC, micro-computer or analyzers.
Applications
Typical applications include abnormal vibration detection and
condition monitoring of production facilities of all industries,
motors, bearings, and pumps.
Vibration Sensors
VS Vibration Sensors
Benets
• Proprietary piezo ceramic material
• High sensitivity
• Large sensing bandwidth
• Built-in amplier
J Type
• Unique detachable cable design for easy installation
• Compact and low-prole (Ø 18.0 × 11.0 mm)
• Waterproof and oil-resistant
• Case-insulated
• Current noise resistant
B Type
• Integrated cable
• Ultra compact and ultra low-prole (8.4 x 11.4 x 2.9 mm)
• Easy to embed
VS–JV10A VS–BV203–B
To Next Page
Need help?
General