Kemove K61 - User Manual

This document serves as a user manual for the KEMOVE K61-K64 mechanical keyboard, detailing its functionalities in both Chinese and English. The keyboard offers a versatile three-mode connection system, including wired, Bluetooth, and 2.4G wireless modes, catering to various user preferences and scenarios.

Function Description:

The KEMOVE K61-K64 keyboard is designed with a comprehensive set of features to enhance user experience, particularly in its wireless capabilities and customizable lighting effects.

Wireless Modes:

The keyboard supports two wireless modes: Bluetooth (BT1, BT2, BT3) and 2.4G.

• Bluetooth Pairing: To enter Bluetooth pairing mode, press and hold FN+Z, FN+X, or FN+C for three seconds. The red and blue lights will flash alternately, indicating that the keyboard is in pairing state. If the device has been previously paired, a single tap will reconnect it. The keyboard supports up to three Bluetooth devices, which can be switched directly using FN+Z/X/C. When in Bluetooth mode, pressing FN+Z/X/C will illuminate the corresponding key in blue to show the active channel.
• 2.4G Connection: To activate 2.4G mode, press FN+B. Hold the B key for three seconds until it flashes white, indicating successful connection. The B key will return to its default state once connected. For 2.4G mode, pairing must be initiated first, followed by inserting the receiver. This process also applies after a reset. When FN is pressed, the B key lights up white to indicate active 2.4G connection. FN+B can also switch between Bluetooth and 2.4G modes, including pairing.
• Wireless Mode Limitation: The ON/OFF switch on the back of the keyboard determines whether it operates in wired or wireless (battery) mode. Wireless modes cannot be used when the keyboard is in wired mode.

Battery Status Check:

Users can check the battery level by pressing FN+Right ALT.

• Wired Mode: A green light indicates a fully charged battery, while a blue light signifies charging.
• Bluetooth Mode: A green light indicates 100%~95% charge, blue light indicates 95%~50%, yellow light indicates 50%~20%, and red light indicates less than 20% charge.

FN Key Combinations (English Section):

The FN key serves as a modifier for a wide range of functions, including media control, system commands, and lighting adjustments.

Media and System Controls:

• FN+1 to FN+0: F1 to F10 functions.
• FN+-_: F11 function.
• FN+=+: F12 function.
• FN+Esc: ` (tilde key).
• FN+Shift+Esc: ~ (tilde key).
• FN+A: Pause/Play media.
• FN+S: Previous song.
• FN+D: Next track.
• FN+F: Mute switch.
• FN+G: Volume down.
• FN+H: Volume up.
• FN+U: Print Screen.
• FN+I: Scroll Lock (the I key lights up in red as a reminder).
• FN+O: Pause.
• FN+J: Insert.
• FN+K: Home.
• FN+L: Page Up.
• FN+M: Delete.
• FN+<,: End.
• FN+>.: Page Down.

Lighting Effects and Customization:

The keyboard offers extensive control over its backlighting.

• FN+|: Hardware light switch.
• FN+↑: Increase brightness (red light flashes three times when maximum brightness is reached).
• FN+↓: Decrease brightness (red light flashes three times when minimum brightness is reached).
• FN+←: Slow down light effect speed (red light flashes three times when minimum speed is reached).
• FN+→: Speed up light effect (red light flashes three times when maximum speed is reached).
• FN+;:: Light effect to the left (supports some dynamic lighting effects).
• FN+'": Light effect to the right (supports some dynamic lighting effects).
• FN+Capslock: Switch the color of the default lighting effect (cycles through red, orange, yellow, green, cyan, blue, purple, white, and returns to backlight).
• FN+Backspace: Toggles backlight off, on, or turns off all lights.
• FN+}]: Software light switch (can be changed via driver).

Keyboard Modes and Locks:

• FN+Win: Locks/unlocks the Windows key (Win key lights red when locked, turns off when unlocked).
• FN+Space: Locks/unlocks FN key functions (FN key lights red when locked, turns off when unlocked; press again to release).
• FN+N: Toggles between all keys without overrun and six keys without overrun. Pressing FN+N three times makes the red light flash to confirm the switch. When FN+N is pressed, the red light indicates no overrun for all keys, and no prompt is given for six keys.
• FN+Enter: Enters power-saving mode. Press FN+Enter for three seconds to activate. In this mode, all backlights are turned off, and only indicators for upper/lower case, Win key lock, Alt, and full key no-rush remain on. Press FN+Enter for three seconds to exit power-saving mode.

Profiles and Standard Layer:

The keyboard supports multiple profiles for customized settings.

• FN+Q: Profile 1.
• FN+W: Profile 2.
• FN+E: Profile 3.
• FN+R: Profile 4.
• FN+T: Switch back to standard layer.
• When in Profile 1, pressing the FN key will illuminate the Q key in white to indicate the active profile.

Maintenance Features:

• Factory Reset: To restore the keyboard to factory settings, press and hold FN+Tab for five seconds.
• Driver Access: FN+Right Shift opens/closes the driver, allowing users to further customize settings, including lighting.

This comprehensive set of features ensures that the KEMOVE K61-K64 mechanical keyboard is a versatile and user-friendly device, offering extensive control over connectivity, media, and aesthetics.