KEMP Technologies LoadMaster 1500 - II. Installation and Configuration Guide; A. Before Getting Started

34
Copyright © 2000 - 2005 KEMP Technologies, Inc. All Rights Reserved.
3. MIB-tree
A file describing the MIBs (one4net.mib.desc) can be found on the CD.
II. Installation and Configuration Guide
A. Before Getting Started
You only need to connect via COM+ (Console) port with a terminal emulation application on PC to initially
setup your LoadMaster machine(s).
Using a null modem cable connect a PC using terminal emulation software from its COM+ port to the
LoadMaster COM port (COM+ settings should 115200,8,N,1). After boot, a login prompt appears; login as
‘bal’ (password ‘1fourall’), and your Access Code will be displayed on the screen.