8
European Community Declaration of Conformity
According to the European community machine standard 2006/95/EG
The manufacturer:
KEMPER
GmbH
Von-Siemens-Str. 20
D-48691 Vreden
confirms that the following machines (or building group, machine part etc.):
Description; Name Filter-Master
Part-No. 64 100 xxx
Corresponds to the following relevant regulations:
98/37/EWG Machine safety guideline
89/336/EWG EMV - Guideline
73/23/EWG Low-voltage - guideline
93/68/EWG Marking - guideline
Applicable harmonized standards, especially:
EN 292 part 1 and part 2, EN 294,
EN 349, EN418, EN 983 Security of machines
EN 1050 Security of machines - guiding
principles for risk evaluation
EN 60204 -1:1998-10 Electrical equipment of machines
EMVG Law referring to the electromagnetic
Compatibility of machines
Part 2 of EN 50081 Specialized basic standard breakdown
Part 2 of EN 50082 Specialized basic standard noise immunity
Applicable national and technical specification, especially:
VDE 0100 construction of low-voltage plants
VDE 0113 Electrical equipment of machines –
complies to EN 60204-1:1998-10
UVV BGV A1 Regulations for the prevention of accidents:
Principles of prevention
BGR 500 2.26 Weld, cuts and related procedures
DIN 45635 Noise levels at machines
This explanation loses its validity, if a change not co-ordinated with the manufacturer
in written form is made.
VREDEN, January 17th, 2007
KEMPER
GmbH
Dipl. - Engineer M. Könning
(Chief technical engineer)
To Next Page
Loading...