Kemper FK-5 - Page 4

EN
4 / 56 – K410036900025-00 / 10.2020 – © www.kemper-olpe.de
0.1
EN
Operating modes
Flushing and cleaning program
Main menu
Process
Device off
Switches off the supply of the tapping point
outlets and flushing processes. The alarm
output remains active. The alarm state is still
logged. Operating mode also permits settings
on the device.
Warning messages
Device remains switched on.
Error messages
Device automatically
switches off.
FK-5 | DN 25
EN
Time mode
Denes the weekly program with daily start and
stop times. The tapping point outlet supply is
switched o between the programmed times.
Flushing and cleaning programs are still carried
out.
Standby
Switches o the tapping point outlet supply.
The programmed ushing processes are still
carried out.
Automatic mode
Bypasses the “Time mode” weekly program.
Time limit
Switches temporarily to automatic mode until the
preset time has elapsed.
Back
Start screen
Active area
Operating modes
Plant off
StandbyTime Mode
Automatic