Kemper FK-5 - Page 5

EN
© www.kemper-olpe.de – 10.2020 / K410036900025-00 – 5 / 56
0.1
EN
Set automatic
Automatic flushing
This is where you can program the weekly
program for ushing the feed pipes. Every
weekday with a start time and ush duration
(max. 360 minutes). A ush duration may
not span multiple days. Only one inlet can be
ushed at a time.
Deactivate flushing
Flush manually
Triggers a manual inlet flushing. „Deactivate
flushing“ or „Automatic flushing“ stops this
function. „Flush manually“ automatically ends
after 360 minutes and the device switches
back to the „Deactivate flushing“ or „Automatic
flushing“ function that was active before.
Flush inlet 1
Set automatic
Automatic flushing
Deactivate flushing Flush manually
EN
Inlet 1/2
“Inlet 1” or “Inlet 2” sets the supply to exclu-
sively through the respective inlet. If the par-
ticular inlet quantity is insucient, a warning
message appears and the tapping point outlet
supply is switched o.
Inlet 1+2
(Automatic inlet control)
“Inlet 1+2” gives priority to supply through
inlet 2. If the inlet quantity is insucient,
inlet 1 opens in addition.
If the overall inlet quantity is insucient,
a warning message appears and the tapping
point outlet supply is switched o.
up
down
left
right
Confirm entry
Inlet control
Inlet 2Inlet 1
Automatic
Operating times
Monday Off 00:00 - 00:00
Tuesday Off 00:00 - 00:00
Wednesday Off 00:00 - 00:00
Thursday Off 00:00 - 00:00
Friday Off 00:00 - 00:00
Saturday Off 00:00 - 00:00
Sunday Off 00:00 - 00:00