Need help?Do you have a question about the Kemppi Pro 4200 EVOLUTION and is the answer not in the manual?
General| Output Current @ 40% ED | 420 A |
|---|---|
| Degree of Protection | IP23S |
| Cooling | Forced air |
| Welding Current Range (MIG/MAG) | 420 A |
| Welding Current Range (MMA) | 10 A |
| Welding Current Range (TIG) | 5 - 420 A |
| Operating Temperature Range | -20°C to +40°C |
| Standards | IEC 60974-10 |
| Input Voltage | 3~ 400 V ±15% 50/60 Hz |
General introduction to the product and manual.
Overview of Pro 3200, 4200, 5200 Evolution power sources.
Description of R10 and R20 remote control devices.
Overview of PL and PX control panels and their functions.
Guidelines for positioning the welding machine for optimal operation.
Instructions for mounting PL and PX control panels.
Procedures for connecting the machine to the mains power supply.
Explanation of the main switch and its function.
Adjusting electrode dynamics for MMA welding.
Instructions for checking and maintaining welding and connection cables.
How the overload protection operates and its indicators.
Information on control fuses F11 and F12 and their ratings.
Detailed technical specifications for the Pro Evolution series.
To Next Page
