Need help?Do you have a question about the Kende CD-620 and is the answer not in the manual?
General| Charging Current (AA) | 500mA |
|---|---|
| Battery Type | Ni-MH / Ni-Cd |
| Compatible Battery Types | AA, AAA |
| Input Voltage | AC 100-240V 50/60Hz |
| Number of Batteries Supported | 4 |
| Protection Features | Overcharge protection, short-circuit protection |
Technical specifications for the CD-220 battery charger model.
Technical specifications for the CD-320 battery charger model.
Technical specifications for the CD-420 battery charger model.
Technical specifications for the CD-520 battery charger model.
Technical specifications for the CD-620 battery charger model.
Explanation of standards, symbols, and protection class for the machine.
Definitions for charging current, start current, and function indicators.
Guidance on checking battery voltage, specific gravity, and handling electrolytic solution.
Procedures for charging batteries, including parallel/series connections and temperature monitoring.
Steps for using the charger for auxiliary engine starting.
Step-by-step guide for charging the battery correctly.
Instructions for using the charger to start an engine.
Important safety precautions during charging and starting procedures.
To Next Page
