SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Pick Up Your Bobbin Thread
Raise presser foot lever. Hold top
thread loosely in left hand and rotate
handwheel toward you one complete
turn.
2. Bring bobbin thread up by pulling
top thread,
3.
F
Pull both threads under and to the
back of the presser foot, leaving 4
to 6 inchesof thread clear.
If you cannot pick up bobbin thread by following stepsgiven above, then check:
1. Isneedle threaded from front to back?
3. Are 3 t-0-_'lTn-_nesof thread com;ng from the shuttle?
4. Isthread from shuttle tangled?
5. Isbobbin properly installed in the bobbin case?
6. Is the machine threaded according to the instructions?
11
To Next Page
Loading...
