SECTION 3, LEARN THE STITCHES
8. Open the zipper.
L
Lower the presser foot and stitch
the rest of the seam.
INVISIBLE ZIPPER AND CORDING
10. Close the zipper and turn
fabric right side up.
INVISIBLE ZIPPER
shOwn. Follow the zipper manufacturer's inst-
ructions. After zipper has been inserted, finish
sewing seam by shifting foot to side position
sewing through side notch.
CORDING
Foot can also be used to make cording for slip-
covers etc. Cover a cord with a strip of bias
fabric and sew as shown.
NOTE:
Use "Low Bar Sewing Machine ZIPPER FOOT"
(6757) for "invisible zipper" and "cording",
which can be obtained at any Sears retail store,
the
11. TO sew the right side of the zip-
per, set the zipper foot on the
right side of the needle.
12. Stitch across and below the bot-
tom of the zipper.
13. Turn the corner and continue to
guide the foot along the zipper
teeth, asshown.
14. Stop about 2" from the top of the
zipper,
15. Lower the needle into the fabric
and raise the presser foot.
16. Remove the basting stitches and
open the zipper.
17. Lower the foot and stitch the rest
31
To Next Page
Loading...
