ADJUSTING THE PRESSURE OF THE
PRESSER FOOT
Push down outer ring of presser foot pressure
regulator (See illustration), This will release pressure
of presser foot. To increase pressure, push down
inner pin until suitable pressure is obtained. For
ordinary sewing, the inner pin should be all the way
down.
Insufficient pressure may cause poor feeding of the
fabric, skipped stitches, or difficulty in guiding the
fabric.
When sewing multiple thickness or heavy fabric
reduce the pressure. Increase pressure when sewing
lighter weight fabrics. If feed dog or presser foot
marks appear on the fabric, reduce the pressure.
12
To Next Page
Loading...
