Kenmore 134966700 - User Manual

®
Full Size Tumble Action Washers
Before beginning installation, carefully read these instructions. This will simpfify the
installation and ensure the washer is installed correctly and safely. Leave these instructions
near the washer after installation for future reference.
NOTE: The electrical service to the washer must conform with local codes and ordinances
and the latest edition of the National Electrical Code, ANS!/NFPA 70.
For your safety the information in
this manual must be followed to minimize the risk
of fire or explosion or to prevent property damage,
personal injury or loss of life.
- Do not store or use gasoline or other flammable
vapors and liquid in the vicinity of this or any
other appliance.
= WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not
use any phone in your building.
• Clear the room, building or area of all
occupants.
• Immediately call your gas supplier from a
neighbor's phone. Follow the gas suppliers
instructions.
• If you cannot reach your gas supplier, call
the fire department.
Installation and service must be performed by a
qualified installer, service agency or the gas
supplier.
Printed in U.S.A.
Contents
S UBJECT PAGE
Pre-lnstallation Requirements 2
Electrical Requirements 2
Grounding Requirements 2
Water Supply Requirements 2
Drain Requirements 2
Rough-In Dimensions 3
Location Of Your Washer 4
Unpacking 4-5
Installation 5-6
Replacement Parts 6
Sears, Roebuck and Co.,
Hoffman Estates, IL 60179 U.S.A.
_N 134966700(0708)

Summary

Pre-Installation Requirements

Tools Required for Installation

Lists the tools needed for the installation process.

Electrical Requirements

Details the necessary electrical specifications for the washer.

Grounding Requirements

Explains the importance and method of grounding the appliance.

Water Supply Requirements

Specifies the requirements for connecting the hot and cold water supply.

Drain Requirements

Outlines the necessary specifications for the washer's drain system.

Rough-In Dimensions

Location Of Your Washer

Unpacking

Installation

Leveling the Washer

Ensures the washer is stable and minimizes noise and vibration.

Washer Connections

Details how to connect the water inlet hoses to the washer.

Replacement Parts

Kenmore 134966700 Specifications

General

Brand	Kenmore
Model Number	134966700
Color	White
Voltage	120 V
Loading Type	Top Loading
Width	27 in.