To Next PageTo Next Page
Need help?Do you have a question about the Kenmore 153.321544 and is the answer not in the manual?
General| Brand | Kenmore |
|---|---|
| Model Number | 153.321544 |
| Type | Electric Water Heater |
| Tank Capacity | 40 gallons |
| Energy Source | Electric |
| Voltage | 240V |
| Wattage | 4500 watts |
| Warranty | 6 years |
| Recovery Rate | 21 gallons per hour |
Explains safety alert symbols, DANGER, WARNING, and CAUTION definitions for hazard communication.
Covers explosion, fire, electric shock, and burn hazards associated with water heater operation and installation.
Details limited warranty coverage, labor warranty, and options for obtaining service or protection agreements.
Lists technical details including model, capacity, dimensions, wattage, and electrical requirements for various water heater models.
Lists necessary materials and tools for water heater installation, covering basic, specialized, and soldering items.
Step-by-step guide for safely disconnecting and removing the old water heater unit.
Guidance on choosing a suitable location, ensuring proper drainage, and preventing property damage from potential leaks.
Information on optional insulation blankets and key facts about the convertible lower heating element.
Instructions for connecting water inlet and outlet pipes, including warnings about solder use and water temperature.
Details on installing the Temperature-Pressure relief valve and insulating pipes to minimize heat loss from water lines.
Crucial steps for filling the tank completely with water before powering on to prevent damage to heating elements.
Safety warnings and step-by-step instructions for converting the lower heating element to 5500 watts.
Guidelines for proper wiring size, connections, grounding, and adherence to utility and code requirements.
Illustrates the standard wiring configuration for a 2-wire lead double element, 240-volt system.
Explains temperature settings, thermostat adjustments, and safety warnings related to hot water temperatures for safe use.
Details on adjusting upper and lower thermostats and outlines related safety precautions.
Procedure for inspecting and replacing the anode rod to protect the glass-lined tank from corrosion.
Instructions for operating the T&P valve and draining the water heater for maintenance, flushing, or freezing protection.
Detailed steps for removing and installing thermostats to ensure proper temperature control.
Guide for cleaning or replacing heating elements to maintain performance and troubleshoot heating problems.
Steps for drain valve washer replacement and contact information for Sears repair services.
Addresses initial startup issues, thermal expansion problems, and common strange noises.
Discusses operational issues and troubleshooting smelly water caused by anode rod reactions and water conditions.
Covers potential hydrogen gas hazards and causes of rumbling noise due to sediment buildup.
Explains the high limit shut off system and provides instructions on how to reset it.
Steps to diagnose and resolve problems related to no or insufficient hot water supply.
Guidance on adjusting the thermostat to lower the water temperature for comfort and safety.
A guide to systematically check for leaks around various components and connections of the water heater unit.
Lists models, capacities, and provides information on ordering specific replacement parts for the water heater.
