To Next PageTo Next Page
Need help?Do you have a question about the Kenmore 153.326762 and is the answer not in the manual?
General| Brand | Kenmore |
|---|---|
| Model Number | 153.326762 |
| Type | Electric Water Heater |
| Fuel Type | Electric |
| Tank Capacity | 40 Gallons |
| Voltage | 240V |
| Diameter | 20.5 inches |
| Wattage | 4500 Watts |
| Warranty | 6 years |
Defines key terms like Sears Service Center for user understanding.
Explains hazard symbols and provides critical safety warnings for operation.
Introduces the manual, stresses safety, and provides context for installation.
Lists model numbers, tank capacity, dimensions, and electrical specifications.
Lists required materials like flexible connectors and expansion tanks for installation.
Details basic and specialized tools required for water heater installation.
Step-by-step guide for safely disconnecting and removing the existing water heater.
Guidelines for choosing a safe indoor location and preparing the installation site.
Specific requirements for installing water heaters in garages.
Details on the use and warnings associated with insulation blankets.
Details about converting the lower element's wattage and associated warnings.
Instructions for connecting hot and cold water pipes, including warnings about improper methods.
Guidance on insulating the temperature-pressure relief valve and water pipes.
Proper installation procedures and safety requirements for the T&P relief valve.
Step-by-step instructions to fill the tank with water before operation to prevent damage.
Detailed instructions for converting the lower element from 3800 to 5500 watts.
Instructions for proper electrical hookup, voltage, circuit sizing, and grounding.
Explains how to interpret and use wiring diagrams for different power supply configurations.
How to adjust water temperature and understand safe temperature ranges.
Procedures for adjusting the upper and lower thermostats for desired water temperature.
How to manually operate and check the relief valve for proper function.
Importance of the anode rod for tank protection and inspection schedule.
Instructions for draining the tank for maintenance or seasonal shutdown.
Step-by-step guide for removing and installing thermostat components.
Procedures for cleaning or replacing heating elements within the tank.
How to replace the drain valve washer to fix leaks.
Initial steps for diagnosing issues before calling for professional service.
Addresses initial startup issues and thermal expansion problems in the water system.
Explains common noises and causes of smelly water, including anode rod effects.
Discusses air in lines, potential hydrogen gas hazards, and rumbling noises.
How to reset the high-limit safety shut-off feature.
Diagnosing and resolving issues where hot water is not produced or is insufficient.
How to adjust the thermostat if water is excessively hot.
Systematic guide to find sources of water leaks on the heater.
Lists all replacement parts with numbers, descriptions, and ordering information.
Section for users to record important personal notes or reminders.
Details the limited warranty, labor warranty, and how to obtain service.
Information on purchasing extended service plans and Sears installation services.
