Need help?Do you have a question about the Kenmore 158 Series and is the answer not in the manual?
General| Type | Mechanical |
|---|---|
| Needle Threading | Manual |
| Buttonhole Styles | 4-step |
| Stitch type | Decorative |
| Stitch Options | Adjustable stitch length and width |
| Needle Positions | Left, center, right |
| Presser Feet | Buttonhole, Zipper |
| Speed Control | Foot pedal |
| Built-in Stitches | 12 |
| Material | Metal frame with plastic components |
Instructions on how to remove the machine's covers to access internal parts.
Procedures for cleaning lint and applying lubricating oil to machine parts.
How to check and adjust the timing between the needle and hook.
Guidance on adjusting both bobbin and top thread tensions for optimal stitching.
Addresses issues related to needle insertion, thread, and mechanical problems.
Explains causes and solutions for upper and lower thread breaks.
Diagnoses problems with stitch length, fabric feeding, and skipped stitches.
How to adjust the height of the presser foot and needle bar.
Adjusting needle position, swing, and timing for various stitches.
Detailed steps for setting the needle's horizontal position for different stitches.
How to adjust feed dog height and ensure zero horizontal movement.
Procedures for aligning the needle and shuttle for correct stitch formation.
Adjusting the needle's side motion for zigzag stitching.
Adjusting the machine for proper straight stitch performance.
Adjusting buttonhole, super, and stretch automatic reverse stitch functions.
Adjusting cam follower clearance for smooth pattern selection.
How to set and adjust the stitch width control for desired zigzag width.
Aligning the cam selector guide plate for correct pattern selection.
To Next Page
