Cycles (cont.)
f
II"
POTS
PANS
UltraWashSensor • AutomaticTemperatureControl . OuiutGuardSystem
m fD lB _ IB fD
_IENSING WASHING WATER HEATING SANI COMPLETE CLEAN CONTROL LOCK
m i _ Em _ Em II
I i I I°°°R°u'c"-
NORMAL WATER CHINA
WASH MISER WASH WASH I RINSE RINSE
SENSING CYCLES OPTIONS
CYCLE
CHINA WASH
r
CHINA
WASH
A ",/" shows what each cycle includes.
Soil Level
Detected By Final
UltraWash Main Heated
Sensor Wash Rinse Wash Rinse Rinse
Heavy
,/ ,/
Light
,/
135°F
57°C
Cycle
Time*
Dry (min.)
,/
Cycled! 70t
,/ ,/ ,/
135°F Cycled 60*
57°C
Water
Usage
(gallons[U.S.]/
litersI
6.5/24.6
4.3/16.3
Detergent
Dispenser
Sections
D
Use
Covered
Section
A light wash and gentle dry for china and crystal. During heated dry, the heating element cycles on and off during that
)ortion of the cycle.
QUICK WASH
(NO DRY)
QUICK
WASH
Heavy
Light
/ / ,/
140OF 28
60°C
/ ,/
140OF 24
60°C
6.5/24.6
4,3/16.3
D
Use
Covered
Section
This cycle is designed for lightly soiled dishes. No drying options are available for this cycle.
QUICK RINSE
(NO DRY)
QUICK
RINSE
,/ ,/
Heavy 18 4.3/16.3
,/
Light 14 2.2/8.3
D
No
Detergent
Needed
For rinsing dishes that will be washed later.
t Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the water, the
longer the cycle time. If the water is already hot enough, the cycle times will be as shown.
The electronic time display pauses while water is being heated and Water Heating status indicator glows while water is being heated to the
temperature shown.
NOTE: YOU can add a dirty dish if the Washing status indicator is on. Opening the door will not affect the sensor.
14
To Next Page
Loading...