EasyManuals Logo

Kenmore 27102 Series User Manual

Kenmore 27102 Series
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
_9. Select cycle settings
_D Hot
;_ Warm @,t Ex Heavy
@: Cool @ Heavy @ High
_ Cold _ Normal @ Low
_ Tap Cored Light @ No Spin
ADJUSTS WASH TIME
Once you select a cycle, the default settings for that cycle will
be lit. Press the cycle modifier buttons to change the Wash
Temp, Soil Level, and Spin Speed, if desired.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Hot
Some cold water is added to save Whites and pastels
energy. This may be cooler than Durable garments
your hot water heater setting.
Heavy soils
VVarrn
Some cold water may be added, Bright colors
so this will be cooler than what Moderate to light soils
your previous washer provided.
Cool = brlghts/darks
Warm water is added to assist Colors that bleed or
in soil removal and to help fade
dissolve detergents. Light soils
Cold
Warm water may be added to Dark colors that bleed
assist in soil removal and to help or fade
dissolve detergents.
Tap Cold
This is the temperature from your
faucet.
Dark colors that bleed ii
or fade
Light soils
10. Select cycle options
Select any other cycle options you may wish to add_ if not
previously set. Some cycles will automatically add certain
options such as Two Rinses. These can be turned off, if desired.
NOTE: Not all options are available with all cycles.
q_. Select Start/Pause/Unlock Lid
to begin wash cycle
START IPAUSE
UNLOCK LID
Press the START/PAUSE/Unlock Lid button to start the wash
cycle. When the cycle has finished, the CYCLE COMPLETE
indicator will light up. Promptly remove garments after cycle
has completed to avoid odor, reduce wrinkling, and rusting of
metal hooks, zippers, and snaps.
Unlocking the ffd to add garmen|s
If you need to open the lid to add 1 or 2 missed garments, you
may do so during the first portion of the sensing step. Press
START/PAUSE/Unlock Lid; the lid will unlock once the washer
movement has stopped. This may take several minutes if the
load was spinning at high speed. Then close lid and press
START/PAUSE/Unlock Lid again to restart the cycle. If lid is left
open for more than 10 minutes, the water wJJJ pump out.
I0

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenmore 27102 Series and is the answer not in the manual?

Kenmore 27102 Series Specifications

General IconGeneral
BrandKenmore
Model27102 Series
CategoryWasher
LanguageEnglish

Related product manuals