Kenmore 796.29002 User Manual (English)

Questions and Answers:

D
daniel79Jul 31, 2025
How to improve soil removal in Kenmore 796.29002?
- P
  Patrick PhamAug 1, 2025
  To ensure optimal soil removal with your Kenmore Washer, use the correct amount of detergent for your load size, soil level, and water hardness. Select a WARM or HOT water setting for normally soiled items, adjusting based on soil type. For heavily soiled items, use the Heavy or Soak & Heavy wash cycle. Always separate heavily soiled items from lightly soiled ones and pretreat stains and heavy soil as directed.
T
Thomas JohnsonAug 5, 2025
How to prevent lint when washing clothes in Kenmore 796.29002 Washer?
- A
  Amy HowardAug 5, 2025
  To prevent lint issues with your Kenmore Washer, avoid overloading it. Wash lint-producing items, such as flannel sheets and towels, separately from dark fabrics and fabrics that attract lint.
L
Lisa OrtizAug 10, 2025
Why are there black or gray marks on clothes after washing in my Kenmore 796.29002?
- B
  Benjamin MillerAug 10, 2025
  If your Kenmore Washer is leaving black or gray marks on your clothes, make sure you are using the correct amount of detergent for the load size, soil level, and water hardness. If you have hard water, consider installing a nonprecipitating water softener or an iron filter. Remove all tissues and papers from pockets before washing. Avoid overloading the washer, and if you're using a detergent that doesn't dissolve well, try pre-dissolving it before adding it to the wash.
B
Billy GarciaAug 15, 2025
What to do if Kenmore Washer leaves yellow or brown rust stains?
- C
  caleb30Aug 16, 2025
  Yellow or brown rust stains in your Kenmore Washer may be due to iron or manganese in your water supply. To restore whites, use a rust remover safe for fabric. Before washing, run the water for a few minutes to clear the lines.
A
Amanda AlvarezAug 20, 2025
Why are there holes, tears, or snags in clothes after washing in Kenmore Washer?
- S
  Sue CookAug 21, 2025
  Holes, tears, or snags in your clothes after washing in your Kenmore Washer can be prevented by fastening zippers, hooks, and buckles before washing. Ensure all objects are removed from pockets. Avoid overloading the washer. The degradation of fabric can also cause this problem.
W
Wesley PattersonAug 26, 2025
How to prevent blue stains on clothes from Kenmore Washer?
- E
  Edgar HayesAug 26, 2025
  To prevent blue stains from your Kenmore Washer, avoid overfilling the fabric softener dispenser and do not pour liquid fabric softener directly onto fabric. Follow recommendations to prevent waxy buildup (scrud) from fabric softener and detergent interaction.

Kenmore 796.29002 Specifications

General

Electrical	AC 120V, 60Hz
Rating of Fuse	125V, 12A for 100~127V/60Hz
Auto Power Off	Yes
Capacity	4.32 cu.ft
Spin Speed	1100 ± 50
Cycles	Normal/Casual, Heavy Duty, Bulky/Bedding, Whitest, Rinse/Spin, Express Wash, Handwash/Wool, Delicates
Finish	Blue White
Door lid	Non-Glass Lid
Inner Tub	Stainless
Motor	INVERTER Direct Drive
Heater	No
Inlet Water Pressure	14.5 ~ 116 PSI (100 ~ 800 kPa)
Time Delay	1-19Hr
Lid Interlock Switch	Magnet Sensor
Control Lock	Yes
Softener Dispenser	Yes
Detergent Dispenser	Yes
Bleach Inlet	Yes
Smart Rinse™with Jet Spray	Yes