To Next PageTo Next PageWhy won't my Kenmore 2125 run or fill with water?
If your Kenmore Washer won't run or fill, or if the wash light remains on, start by checking the water supply. Ensure both hoses are attached and have water flowing to the inlet valve, and that both hot and cold water faucets are turned on. Also, inspect the inlet valve screens for clogs and check the inlet hoses for any kinks that might be restricting water flow.
What to do if my Kenmore 2125 Washer is leaking water?
If your Kenmore Washer is leaking water, several issues could be the cause. First, ensure the washer is level and the load isn't unbalanced or tightly packed. Check that the fill hoses are tightly connected and that all four fill hose flat washers are properly seated. Also, verify the drain hose connection is secure and not taped over. Finally, inspect your household plumbing for leaks or clogs.
Why does my Kenmore 2125 make clicking noises?
Clicking or metallic noises in your Kenmore Washer can be due to objects caught in the drain system. Always empty pockets before washing to prevent loose items like coins from falling between the basket and tub or blocking the pump. It's also normal to hear metal items on clothing, such as snaps or zippers, touch against the basket.
How to increase water level in my Kenmore 2125?
It is normal for some of the load to be above the water line. The Kenmore Washer senses load sizes and adds the correct amount of water for optimal cleaning.
Why is my Kenmore 2125 vibrating so much?
Several factors can cause your Kenmore Washer to vibrate or become off-balance. Ensure the front and rear feet are firmly on the floor, and the washer is level. Tighten the jam nuts against the cabinet's bottom. Check the floor for flexing or sagging; a 3/4" plywood piece can help. Also, distribute dry items evenly around the basket wall, avoiding tightly packed loads or single items. For bulky items like jackets, use the Bulky cycle.
Why is my Kenmore Washer gurgling and humming?
If you notice gurgling or humming sounds from your Kenmore Washer, it's likely due to the washer draining water. During the Drain/Spin cycles, the pump makes a continuous humming sound with periodic gurgling or surging as the final amounts of water are removed, which is normal.
Why is my Kenmore Washer humming?
If you hear a humming sound from your Kenmore Washer, especially when the sensing light is on, it's a normal part of the sensing process. The washer performs sensing spins before adding water, which can take several minutes.
General| Brand | Kenmore |
|---|---|
| Color | White |
| Control Type | Electronic |
| Steam Function | No |
| Energy Star Certified | Yes |
| Voltage | 120V |
| Series | 2125 |
| Type | Top Load |
| Depth | 27 inches |
| Height | 43.5 inches |
Key precautions to reduce risks of fire, electric shock, or injury when using the washer.
Explains how the washer saves energy with lower water levels and reduced temperatures.
Guides users on selecting HE detergents for optimal performance and avoiding issues.
Details how low-water cleaning with HE detergent targets soils effectively.
Describes typical sounds during different wash cycle stages for user reassurance.
Explains the washer's automatic water level adjustment based on load size.
Explains temperature controls and selection based on fabric and soil types.
Covers options like Rinse and Fabric Softener for customizing wash cycles.
Describes how to select wash cycles using the main control knob.
Details the function of the button for starting, pausing, and unlocking the lid.
Explains the lights that indicate the progress of the wash cycle.
Instructions on sorting clothes, checking pockets, and preparing items for washing.
Guidance on adding the correct type and amount of HE detergent to the washer.
Proper methods for loading clothes to ensure effective cleaning and reduce tangling.
Instructions for using the bleach dispenser and adding fabric softener.
How to choose the wash cycle, temperature, and additional options.
How to start, pause, and manage the lid during the wash cycle.
Monthly procedures for cleaning the washer interior and exterior.
Instructions for vacation, winter storage, and transporting the washer.
Steps for setting up and running the washer after a period of non-use.
Solutions for issues related to washer stability, leveling, and load imbalance.
Explains typical operational sounds like clicking, gurgling, or humming.
Troubleshooting steps for identifying and fixing water leaks and inlet hose problems.
Solutions for when the washer fails to drain or spin properly, leaving loads wet.
Troubleshoots issues from excessive detergent, causing suds that hinder operation.
Addresses issues where the washer won't start, fill, or stops unexpectedly.
Solutions for loads with sand, lint, or stains, and general cleaning effectiveness.
Guidance on preventing tangling and ensuring proper load packing for better washing.
Solutions for incorrect dispenser use and fabric damage during washing.
Addresses common issues like washer odors and the lid lock indicator flashing.
Information and benefits of purchasing a Master Protection Agreement for the appliance.
Details the terms, coverage, and exclusions of the one-year limited warranty.
Legal disclaimers regarding implied warranties and limitations of remedies.
