Need help?Do you have a question about the Kenmore 31130 and is the answer not in the manual?
General| Brand | Kenmore |
|---|---|
| Model Number | 31130 |
| Color | Stainless Steel |
| Number of Fan Speeds | 3 |
| Lighting | Yes |
| Light Type | Incandescent |
| Filter Type | Aluminum Mesh |
| Material | Stainless Steel |
| Installation Type | Under Cabinet |
| Type | Under Cabinet |
| Width | 30 inches |
| Depth | 19.75 inches |
| Ventilation Type | Ducted |
Details the manufacturer's one-year warranty for parts, labor, and adjustments.
Lists items not covered by the warranty, such as damage from accident or misuse.
Provides critical safety guidelines for operation, installation, and maintenance of the range hood.
Offers specific instructions on how to handle and prevent range top grease fires safely.
Highlights important operational cautions, including indoor use, ventilation, and motor protection.
Allows the fan to run for 5 minutes after cooking, clearing residual air, and can be cancelled.
Controls the fan speed, with indicators showing the selected level, and allows turning the blower off.
Automatically adjusts blower speed to high if excessive heat is detected above the cooking surface.
Controls the integrated lighting with three intensity levels, from low to off.
Signals when grease filters need cleaning by blinking until reset.
Instructions for cleaning grease filters, noting they are dishwasher safe.
Guidance on cleaning stainless steel surfaces, including what to use and avoid.
Lists included parts like filters, lamps, adapters, and mounting brackets.
Lists necessary ducting accessories and optional flue extension.
Lists essential tools for installation, including screwdrivers, drill, saws, tape measure, and duct tape.
Illustrates various ducting components like wall caps, elbows, and ductwork.
Components for concealing the exhaust duct, including upper and lower flues.
Details adapters for horizontal/vertical discharge and the included blower.
Provides equivalent length values for various ductwork components to calculate system resistance.
Guides the user on planning the ductwork layout, minimizing bends for efficiency.
Specifies recommended and minimum clearances between the hood and the cooking surface.
Illustrations show duct openings for vertical and horizontal discharge configurations.
Explains the importance of grounding and how to connect the appliance properly.
Details the recommended location for the electrical outlet relative to the hood.
Caution regarding blue wires for an optional make-up air device.
Instructions on how to remove the grease filters for cleaning or maintenance.
Steps to clear metal plates or knockouts for vertical or horizontal exhaust.
Instructions for disassembling and repositioning the blower for horizontal exhaust.
Guidance on attaching the adapter/damper to the hood for exhaust connection.
Instructions for building proper wall framing to support the hood mounting bracket.
Steps to install the bracket for the decorative flue at the ceiling.
How to attach the main hood body to the mounting bracket and wall securely.
Steps to attach the blower to the hood for horizontal exhaust.
Attaches the adapter/damper and connects the ductwork for vertical exhaust.
Instructions for assembling the upper and lower decorative flue sections.
Guides placement of the decorative flue base onto the hood.
Attaches the upper flue to its mounting bracket using screws.
Steps for correctly inserting and securing the grease filters into place.
Instructions for safely removing and installing new halogen bulbs.
Lists all available replacement parts with part numbers and quantities for different hood widths.
Instructions on how to order replacement parts by part number.
To Next Page
