To Next PageTo Next PageWhat to do if my Kenmore 31510 Vacuum Cleaner cannot return to the charging dock?
If your Kenmore Vacuum Cleaner can't return to the charging dock, check for obstructions. Ensure there are no objects closer than 5ft (1.5m) from the front and 3ft (1m) from either side of the dock. Also, the robot might be stuck or tangled; if so, pick it up, remove any obstructions, and manually reconnect it to the charging dock.
How to fix a Kenmore Vacuum Cleaner that will not power on?
If your Kenmore Vacuum Cleaner won't power on, first ensure it's not simply turned off. Press the quick start power button to turn it on. If it still doesn't power on, the battery may be depleted. In this case, charge the battery.
What to do if my Kenmore 31510 stops working suddenly?
If your Kenmore Vacuum Cleaner suddenly stops working, several issues could be the cause. The side brushes or wheels might be jammed, so remove any entangled objects or clean the wheel housing. The brushroll could be jammed or incorrectly installed, so remove any obstructions and reinstall it. The battery may be depleted, so charge the battery. Finally, the robot vacuum cleaner may be stuck, so free it and remove any obstacles, then restart the vacuum cleaner.
How to troubleshoot a Kenmore 31510 that cannot be charged?
If your Kenmore Vacuum Cleaner isn't charging, the charging pins on the robot might not be aligning with the pins on the charging dock. Make sure the charging pins are cleaned and in direct contact with each other. Also, debris might have accumulated on the charging pins, so clean them.
Why is the suction power weak on my Kenmore 31510?
The suction power of your Kenmore Vacuum Cleaner might be weak due to several reasons. The dust bin could be full, so try emptying it. The filter might need cleaning or be incorrectly installed, so check and clean the filter or ensure correct installation. Also, make sure the dust bin is correctly installed and firmly snapped in place. Ensure that filters are installed correctly. If the robot is on Energy-saving Mode, switch to Turbo Mode via the app. Finally, the battery may be depleted, so charge it.
Why does my Kenmore Vacuum Cleaner not clean automatically at the scheduled time?
Your Kenmore Vacuum Cleaner might not clean automatically at the scheduled time for a few reasons. Ensure the robot vacuum cleaner is powered on by pressing the quick start power button. The scheduled time may be set incorrectly, so you may need to reset the time and reschedule the cleaning time. Also, the battery may be depleted, so charge the battery. All settings may be erased when the vacuum cleaner is turned off or when the battery power is exhausted.
Why does my Kenmore 31510 Vacuum Cleaner Wi-Fi network connection fail?
If your Kenmore Vacuum Cleaner's Wi-Fi connection fails, the network signal might be weak, so try again on a stronger network. The APP setting might not be correct. Your device and robot vacuum cleaner might not be connected to the same Wi-Fi network, so check the connection and make sure they are on the same network. The robot vacuum only supports 2.4 GHz Wi-Fi networks.
Why does my Kenmore 31510 reverse backwards irregularly?
If your Kenmore Vacuum Cleaner reverses backwards irregularly, the front bumper sensor may be jammed. Remove any debris that may have become trapped behind the front bumper sensor.
What to do if Kenmore 31510 Vacuum Cleaner robot movement path is abnormal?
If the robot movement path of your Kenmore Vacuum Cleaner is abnormal, it might be a software-related issue. Turn off the robot by holding down the power button for 3 seconds. Restart the robot by pressing the power button twice.
General| Brand | Kenmore |
|---|---|
| Model | 31510 |
| Category | Vacuum Cleaner |
| Language | English |
Details all components and parts included in the robot vacuum cleaner package.
Visual identification and labeling of all robot vacuum cleaner components and accessories.
Step-by-step instructions for installing boundary strips to restrict robot cleaning areas.
Guidance on positioning and connecting the charging dock and adapter for the robot vacuum.
Instructions for downloading the Kenmore app, registering, and connecting the robot to Wi-Fi.
Details on AP mode Wi-Fi setup and integrating voice control with Google Assistant or Alexa.
How to power on, pause, stop, and power off the robot vacuum cleaner.
Selection of cleaning modes (Auto, Spot, Edge, Manual) and adjustment of suction power.
Instructions for scheduling automatic cleaning sessions for the robot vacuum.
Guidance on cleaning frequency for robot parts like filters, brushrolls, and side brushes.
Procedure for cleaning anti-drop sensors and charging pins to ensure optimal performance.
Solutions for issues where the robot vacuum does not power on or fails to operate.
Addressing suction power issues, charging failures, Wi-Fi connection errors, and abnormal movement.
Understanding error tones and indicator lights for diagnosing robot issues.
