Kenmore Elite 116.31150

Questions and Answers

D
derekhamiltonAug 1, 2025
Why is my Kenmore Vacuum Cleaner not picking up dirt?
- J
  Jonathon RyanAug 2, 2025
  If your Kenmore Vacuum Cleaner isn't picking up dirt well, there are several potential causes. It could be due to a full or clogged dust bag (change the bag), the wrong pile height setting (adjust the setting), a worn agitator (replace it), a clogged nozzle or bag holder (check removing clogs), a clogged hose (check for clogs), a hole in the hose (replace the hose), the hose not being fully inserted (insert it fully), the motor protection system being activated (check for clogs), dirty filters (clean or change the motor safety filter and exhaust filter), or the clean-out port not being closed (close the clean-out port).
M
Michael ThomasAug 7, 2025
How to fix a Kenmore Elite 116.31150 Vacuum Cleaner that won’t run?
- B
  Bobby RichardsonAug 7, 2025
  If your Kenmore Vacuum Cleaner won’t run, first ensure it is firmly plugged into a working wall outlet and that the desired setting is selected on the touch control. If it still doesn’t run, check the circuit breaker or fuse and reset or replace if necessary. Also, the thermal protector may have tripped; allow the vacuum cleaner to cool for 50 minutes. Finally, test the wall outlet with another appliance to ensure it is functioning correctly, and have it serviced if needed.
D
Donna MedinaAug 12, 2025
Why is the agitator not turning on my Kenmore Elite 116.31150?
- R
  Ryan FieldsAug 12, 2025
  If the agitator in your Kenmore Vacuum Cleaner isn't turning, make sure the handle isn't in the full upright position; move it from that position. Also, the agitator overload protector may have tripped; reset it. The thermal protector may have tripped; allow the vacuum cleaner to cool for 50 minutes. Ensure the switch is in the CARPET position, not FLOOR position.
R
Ronald ThompsonAug 16, 2025
Why won't the Pet Handi-Mate run on my Kenmore Elite 116.31150?
- A
  Anthony ComptonAug 17, 2025
  If the Pet Handi-Mate won't run when attached to your Kenmore Vacuum Cleaner, first check the agitator for entangled carpet pile and clean it. Also, check if the suction control is open and close it. If there is a hole in the vacuum hose, replace it. If these steps don't resolve the issue, refer to the vacuum cleaner troubleshooting tips.
J
Jennifer GonzalesAug 22, 2025
What to do if airflow is restricted with attachment use on Kenmore Elite 116.31150?
- J
  John ChapmanAug 22, 2025
  When using attachments with your Kenmore Vacuum Cleaner, restricted airflow and sound changes can occur. This may be because the attachment use restricts air flow. Check attachments for fuzz, lint, pet hair, or other debris. Alternatively, new carpet fuzz might have clogged the air path; check removing clogs and clean the hose.
R
Robert LongAug 27, 2025
What to do if my Kenmore Elite 116.31150 Vacuum Cleaner picks up rugs?
- J
  Jeffrey StewartAug 27, 2025
  If your Kenmore Vacuum Cleaner picks up moveable rugs or pushes too hard, it's likely due to the wrong pile height setting. Adjust the setting to resolve this.