Need help?Do you have a question about the Kenmore Sears 116 and is the answer not in the manual?
General| Brand | Kenmore Sears |
|---|---|
| Model | 116 |
| Category | Vacuum Cleaner |
| Amps | 12 |
| Power Source | Electric |
| Voltage | 120V |
Diagram identifying key components and features of the upright vacuum cleaner.
Step-by-step guide for attaching the handle to the vacuum cleaner body.
Instructions on how to plug in and turn on the vacuum cleaner.
Guide on adjusting the vacuum cleaner's height for different carpet types.
Instructions for using the optional bare floor setting.
How to release the vacuum cleaner's handle to an upright position.
How to operate the on/off switch located on the handle.
Instructions for the on/off switch located on the vacuum cleaner body.
Explanation of the two-speed power selection for various floor types.
Steps for detaching and using the vacuum cleaner's attachments.
How to use the suction control slide on the telescoping wand for adjustable suction.
Details on an optional wand featuring a suction control slide mechanism.
Instructions on how to properly store the vacuum cleaner's attachments.
Information regarding the optional extension hose and its connection.
Advice on effective vacuuming techniques for different areas and surfaces.
Explains the built-in protection against motor and belt damage.
How the optional performance indicator signals airflow blockages.
Instructions on how to properly store the vacuum cleaner when not in use.
Guide on cleaning the vacuum cleaner's exterior and its various attachments.
Detailed steps for safely disconnecting and removing the drive belt.
Instructions on how to unlock and remove the base plate for access.
Guide on how to install a new drive belt onto the brush assembly.
An exploded diagram showing the components of the brush assembly for correct reassembly.
How to inspect the brush for wear and determine if replacement is needed.
Steps for removing worn brushes and installing new ones into the assembly.
Diagram illustrating the components of the brush assembly for reference.
To Next Page