CUUMING TIPS
Carpet edges.
Guide eithersideorthe frontofthe nozzlealong a
baseboard.The fulllengthbrusheshelpremove
trapped dirtatcarpet edges.
Stairs.
Put handle in full upright position, Use the crevice tool
or fabric brush. Set the On/Off Switch to HL
(Optional)
PersonalInjuryHazard
Usecare if vacuum cleaner isplaced on stairs.If it
falls,personalinjuryor property damage could
result.
4P
CAUTION
For best cleaning
results, keep the
airflow passage-
clear.
Occasionally,
check each ol
the areas
indicated for
clogs.
Unplug the
cleaner from the
outlet before
checking.
Whenusingtheregularhoseor withthe extension
hoseattached, thecleaner shouldbe ona solid
surface, suchas the floor,on thesame level orbelow
the level of the user'sfeel Do NOTusethe hoseswhen
the cleanerisabove the level of theuser'sfeet.
FEATURES
WARNING
PersonalInjuryHazard
Always unplug the vacuum cleaner before
cleaning the brusharea as brushmay suddenly
restart.Failure to do so can resultin personal injury.
BELTPROTECTIONSYSTEM
The cleaner has built-in protection against motor and
belt damage should the brush jam. When an object
slows down or stops the brush roll, the Belt Protection
Reset Button pops up, the brush roll stops and the
headlight goes off.
The suction
motor will
continue to
run.
To correct
problem: See
the Trouble-
Shooting
chaff on
page 21.
Reset
Button
To reset: Push inthe ResetButton.
-- Bare Floor
(opt_
_ExLo
-- Low
Med
-- High
Belt Protection
10
To Next Page
Loading...
