Kenmore Sears 116 - Exhaust Filter Cleaning Guide

Unfoldthe new dust
bag.
Insertthe dustbag onto
the bag holder
completelyby holding
the bag collar.
Snap the dustbag collar
intoposition.
Position the bag cover
so its positioning tab
fits into the body
positioning tab slot.
ili/
Body
Slot
Closethe bag cover.
You willhear a snqp when
the cover issecurelyclosed.
IILTERCLEANING
WARNING
Check filter
frequently.
Clean when
dirty.
Pressthe handle
releasepedal to
letthe upper
portionofthe
cleanerlayback
againstthe floor.
Grasp the air
exhaust panel
with a hand on
each side, press
inward and pull
the panel
forward.
Lift the foam filter to
remove. Wash the
foam filter, rinse
and dry.
Do not clean in the
dishwasher. Do not
install while damp.
Pins
Replace the
exhaustpanel
Returnthe
cleanertothe
uprightposition.
Replace _he dry
foam filter,
carefully
positioning it so the
slitsfit around the
four raised pins.
14