Need help?Do you have a question about the Kenmore 385.16677 and is the answer not in the manual?
General| Brand | Kenmore |
|---|---|
| Model Number | 385.16677 |
| Type | Mechanical |
| Needle Position | Variable |
| Foot Control | Yes |
| Buttonhole Styles | 1-step |
| Needle Threader | Yes |
| Drop Feed | Yes |
| Free Arm | Yes |
| Stitch Types | Stretch, Decorative |
| Stitch Options | Adjustable stitch length and width |
Essential safety precautions to follow when operating the serger.
Details on how and where to obtain warranty service.
Key technical details and measurements of the serger machine.
Diagram and list of all serger parts.
Information on how to order replacement parts and optional accessories.
Steps to connect the serger to an electrical power source.
Guidance on first-time use, safety precautions, and basic operation.
Instructions for turning the handwheel and operating machine covers.
How to position the thread guide bar and attach spool holder accessories.
How to change needles and raise/lower the presser foot.
Procedures for removing, attaching, and adjusting presser foot pressure.
How to adjust stitch length and differential feed ratio for fabric types.
How to activate, deactivate, and adjust the upper knife.
How to adjust the cutting width dial for desired seam width.
How to adjust the needle plate setting for rolled hemming.
Comprehensive guide to threading all serger threads.
Instructions for starting, finishing, and securing seams.
Guide to setting and troubleshooting thread tension for 4-thread sewing.
Guide to setting and troubleshooting thread tension for 3-thread sewing.
Machine settings and thread guidance for specific hemming techniques.
Guidance for decorative overedging and pin tucking stitches.
How to replace and clean the upper knife assembly.
Instructions for replacing the light bulb and cleaning the feed dog.
Guidance on lubricating the machine and how to carry it.
Resolving problems with the fabric not feeding smoothly.
Troubleshooting causes and solutions for needle and thread breakage.
Fixing skipped stitches, uneven seams, and puckering.
Resolving issues where the machine doesn't operate or fabric is cut poorly.
To Next Page
