CHANGING THE PRESSER FEET
The various attachment feet available for certain
kinds of work are to be fastened to the presser bar.
To attach the foot, raise the presser bar to its highest
position by raising the presser foot lever. Loosen
the presser foot thumb screw, choose the proper
foot, insert from the front. Tighten the screw using
the large screw driver and make sure that the foot
is secure.
TURNING A CORNER
Stop sewing machine with needle in fabric. Raise
preseer foot. Turn fabric. Lower presser foot and
continue stitching.
FEED DOG CONTROL
The drop feed control knob is situated on the right
front of machine bedplate. When knob is turned to
the left, feed dog drops and does not pull material.
This allows the operator freedom of movement of
material, as for darning. For regular sewing, turn
knob to the right.
!
_J
15
i
To Next Page
Loading...
