EasyManua.ls Logo

Kenmore 625.383000 User Manual

Kenmore 625.383000
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
P/N 7332856 (Rev. D 10/8/12)
Use & Care Guide
Manual de Uso y Cuidado
English / Español
Model / Modelo No. 625.383000
Kenmore®
Water Softener
with High Flow Valve
Ablandador de Agua
con válvula de alto flujo
Sears Brands Management Corporation
3333 Beverly Road
Hoffman Estates, IL 60179 U.S.A.
www.kenmorewater.com
www.kenmore.com
www.sears.com
®
System tested and certified by NSF
International against NSF/ANSI Standard 44
for hardness reduction and efficiency,
and certified to NSF/ANSI Standard 372.
Este sistema ha sido probado y certificado
por NSF International
según la norma NSF/ANSI 44
para la reducción de la dureza y eficiencia,
y certificado según la norma NSF/ANSI 372.
Question and Answer IconNeed help?

Do you have a question about the Kenmore 625.383000 and is the answer not in the manual?

Kenmore 625.383000 Specifications

General IconGeneral
BrandKenmore
Model625.383000
CategoryWater Dispenser
LanguageEnglish

Summary

Warranty Information

Limited Warranties

Details the one-year and ten-year limited warranties for the water softener.

Warranty Limitations and Remedies

Explains disclaimers of implied warranties and limits on remedies.

Safety Guides

General and Installation Safety

Covers essential safety precautions for operation and installation.

Specifications and Performance

Technical Specifications

Details rated softening capacity, efficiency, flow rates, and limits.

Product Dimensions

Physical Measurements

Diagram showing front and side views with key dimensions.

Installation Planning and Parts

Packing List

Lists all parts required for assembly and installation.

Installation Site Selection

Criteria for choosing the best location for the water softener.

Installation Procedure

Bypass Valve and Adaptor Setup

Instructions for installing the bypass valve and threaded adaptors.

Hose Connections and Leak Testing

Connecting hoses, performing leak tests, and grounding.

Controller Setup and Operation

Setting Time, Hardness, and Salt

Programming initial settings for time, water hardness, and salt level.

Regeneration Settings

Configuring the automatic recharge start time.

Softener Care and Maintenance

Sanitizing and Adding Salt

Procedures for sanitizing the unit and adding softener salt.

Salt Type Considerations

Guidance on using KCI salt and salts with iron additives.

Advanced Controller Features

Manual Recharge and Efficiency Mode

Initiating manual regeneration and setting efficiency mode.

Cycle Time Adjustments

Adjusting backwash and fast rinse times for performance.

Service and Troubleshooting

Routine Checks and Problem Diagnosis

Performing initial checks and using the troubleshooting guide.

Electronic Diagnostics

Accessing diagnostic modes for system checks.

Parts and Diagrams

Exploded Views and Parts Lists

Diagrams and component lists for the softener and valve assembly.

Support and Service

Contacting Sears for Service

Phone numbers for home repair, parts, and protection agreements.

Related product manuals