Kenmore 630.1395 User Manual (English)

Other manuals for Kenmore 630.1395

Use And Care Guide21 pages

Use & Care Guide64 pages

Questions and Answers:

A
Allen JenkinsAug 18, 2025
How to fix Kenmore 630.1395 that does not start?
- T
  Tara PriceAug 18, 2025
  If your Kenmore dishwasher isn't starting, several factors could be at play. First, ensure the door is completely shut. Then, check that the main power switch is on. If the unit is still unresponsive, it might need a reset, or a previous cycle may not have fully completed. Also, verify that the delay start function isn't engaged. Check your circuit breaker and ensure the dishwasher is receiving power. Make sure you've selected a cycle before closing the door, and confirm that the water supply is turned on.
M
megan12Aug 20, 2025
What to do if Kenmore Dishwasher isn’t getting dishes clean enough?
- E
  Eugene WilliamsAug 20, 2025
  If your Kenmore dishwasher isn't cleaning dishes adequately, several issues could be the cause. Start by checking if the spray arm movement is obstructed or if the spray arm nozzles are clogged. Also, consider whether you're using detergents properly and if the filters are clogged. Ensure dishes aren't nested too closely together and that the selected wash cycle is appropriate for the food soil conditions.
D
Dr. Peter Adams MDAug 23, 2025
Why are dishes not getting dry enough in my Kenmore 630.1395?
- D
  Dr. Bradley HaynesAug 23, 2025
  If your Kenmore dishwasher leaves dishes not dry enough, consider these factors. Ensure the rinse agent dispenser is full, as rinse agent improves drying. Also, rearrange the load to prevent nesting. Lastly, check that the selected cycle includes drying, as some cycles like Quick Rinse do not.
J
Jonathan VillaAug 26, 2025
Why is my Kenmore 630.1395 leaking water?
- M
  Matthew ReidAug 26, 2025
  If your Kenmore dishwasher is leaking water, several factors could be responsible. The wrong type of detergent can cause excessive suds, leading to leaks, so ensure you're using only dishwasher detergents. Check that the door seal is correctly in its track. Make sure the condensation vent isn't blocked. Finally, improper installation of the dishwasher could be the cause.
B
Brandon DickersonAug 28, 2025
Why does my Kenmore 630.1395 seems to run a long time?
- Y
  younganthonyAug 28, 2025
  If your Kenmore dishwasher runs for an extended period, several factors could be the reason. Check if the incoming water isn't warm enough; running the hot water faucet at the sink nearest to the dishwasher before starting a cycle can help. Be aware that cycle time varies based on soil and water conditions, as sensors in the dishwasher automatically increase the cycle time when heavy soil is detected. Also, ensure the rinse agent dispenser is full and verify that the dishwasher is connected to the hot water supply.
P
Pamela GarnerAug 30, 2025
Why is my Kenmore 630.1395 Dishwasher not filling with water?
- A
  Austin LongAug 30, 2025
  If your Kenmore dishwasher isn't filling with water, there are a few things to check. First, make sure there isn't a restriction in the water supply system by ensuring the water supply valve (typically under the kitchen sink) is open and that the water supply line has no kinks or clogs. If a previous wash cycle wasn't completed, this could also be the reason. Finally, check if the delay-start function is active.
D
David BrownSep 2, 2025
Why does my Kenmore 630.1395 Dishwasher have an odor?
- L
  lhuffSep 2, 2025
  If your Kenmore dishwasher has an odor, it could be due to several reasons. Food debris at the bottom of the dishwasher or food particles near the door seal are common causes. Additionally, dishes left too long in the unit before running a cycle, residual water at the bottom of the dishwasher, or an obstructed drain hose can contribute to odors. Ensure the unit has completely drained from the last cycle.
J
Jaime FuentesSep 4, 2025
What to do if display does not illuminate on Kenmore Dishwasher?
- W
  Wayne SalinasSep 4, 2025
  If your Kenmore dishwasher's display doesn't illuminate or the console lights aren't on, check whether a fuse has blown or a circuit breaker has tripped. Also, ensure that the door is properly latched and completely closed.
W
williamsmichaelSep 7, 2025
Why is there noise during wash cycle in my Kenmore 630.1395 Dishwasher?
- K
  Kimberly JacksonSep 7, 2025
  If you're experiencing noise during the wash cycle of your Kenmore dishwasher, it might be due to improperly arranged dishes. Water circulation sound is normal, but if you suspect items are banging into each other or into the spray arms, ensure optimal arrangement.
E
Emma VasquezSep 9, 2025
How to prevent streaks on glassware from Kenmore 630.1395?
- K
  Kathleen LiSep 9, 2025
  If you observe streaks on glassware or residue on the dishes from your Kenmore dishwasher, adjust the rinse agent dispenser based on the hardness of your water.