EasyManua.ls Logo

Kenmore 795.7108 - Page 14

Kenmore 795.7108
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HOW TO REMOVE AND INSTALL THE
FREEZER DRAWER
IMPORTANT: To avoid possible injury or product or
property damage, you will need two people to perform the
following instructions.
2. Installing Freezer Drawer
• Hold the center bar with both hands and pull it out until
both rails are fully extended.
• Hook door supports (1) into rail tabs (2).
• Lower door into final position and tighten the screws (3).
• Make sure you have a right rail cover for each side.
_ Right
Rail Cover
Left _'_1_
Rail Cover _11_
• Align the top holes of the rail cover with the top holes of
the door supports to assemble the rail covers.
Assembly Hole
• With the drawer pulled out to full extension, insert the
lower basket (4) in the rail assembly.
• , WARNING: To prevent accidental child and pet
entrapment or suffocation risk. DO NOT allow them to
play inside of drawer.
• , WARNING: DO NOT step or sit down on freezer door.
14