To Next PageTo Next Page
Need help?Do you have a question about the Kenmore 795.71306.010 and is the answer not in the manual?
General| Brand | Kenmore |
|---|---|
| Model | 795.71306.010 |
| Category | Refrigerator |
| Language | English |
Instructions for disconnecting power before servicing the appliance.
Disclaimer and notice for experienced users regarding repair risks.
Lists electrical ratings, leakage, and consumption for the refrigerator.
Details performance data under no-load conditions at different ambient temperatures.
Provides vacuum, pressure, and refrigerant specifications for the cooling system.
Specifies clearance requirements for proper refrigerator installation and air circulation.
Lists part numbers and names for replaceable components of the refrigerator.
Illustrates the air circulation path within the refrigerator for cooling.
Step-by-step guide for removing the fan and its motor assembly.
Instructions for removing the defrost control assembly and its sensor.
Procedures for removing and replacing the refrigerator and freezer compartment lamps.
Steps to remove the refrigerator's control box and associated wiring.
Instructions for removing the multi duct component, including its caps and wiring.
Detailed steps for removing and replacing the refrigerator doors.
Guide on how to remove and install the refrigerator's pull-out drawer assembly.
Instructions for detaching and removing the refrigerator door handles.
Procedures for leveling the refrigerator and aligning its doors for proper closure.
Explains the role, composition, and usage notes for the refrigerator compressor.
Details the composition, role, and usage of the PTC starter for the compressor motor.
Defines the OLP, its role in protecting the compressor motor, and maintenance notes.
Troubleshooting steps for compressor and general electric component issues.
Diagnostic procedures for the PTC starter and OLP related to compressor problems.
Troubleshooting guide for other electrical parts like fan motors and sensors.
A chart to diagnose refrigerator complaints based on points to be checked and remedies.
Troubleshooting guide for refrigeration cycle issues based on state, temperature, and remarks.
Diagnostic flowchart for sealed system issues causing a "Not Cooling" complaint.
Explains the basic operation principle of the icemaker unit.
Details the functions of the icemaker including start, making, and ejection modes.
Guide to operating the icemaker in test mode for diagnostics and function checks.
Describes the water supply function and its dependency on DIP SW settings.
Explains the function of the ice maker stop switch for operation control.
Details the basic functions and controls of the refrigerator's MICOM system.
Explains the function and behavior of the open door alarm system.
Describes the defrosting cycle initiation, stopping conditions, and potential malfunctions.
Outlines the sequential order of electrical part activation during operation and testing.
Provides error codes and their meanings for diagnosing MICOM system defects.
Instructions for entering and operating the product's test modes for diagnosis.
Overview of the Printed Circuit Board (PCB) functions and connector layouts.
Explains the voltage behavior of temperature sensors based on compartment temperature.
Details pin assignments and output voltages for the icemaker circuit components.
Provides resistance values for freezer and refrigerator sensors at various temperatures.
Exploded view of case-related parts with position numbers for identification.
Exploded view illustrating various parts located within the freezer compartment.
Exploded view showing parts specific to the refrigerator compartment.
Exploded view detailing parts associated with the pantry section of the refrigerator.
Exploded view of various components and parts related to the refrigerator doors.
Exploded view illustrating components of the water system and icemaker.
