EasyManua.ls Logo

Kenmore 796.4139 Series - User Manual

Kenmore 796.4139 Series
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Table of Contents

Questions and Answers

  • J
    jacksonmichaelAug 19, 2025
    Why is my Kenmore 796.4139 Washer not turning ON?
    • S
      Sara WebsterAug 19, 2025
      If your Kenmore Washer isn't turning on, ensure the power cord is securely plugged into a grounded, 3-prong, 120-VAC, 60-Hz outlet. Also, check your house fuse or circuit breaker. Reset the breaker or replace the fuse. If multiple appliances are on the same outlet causing an overload, consult an electrician to install an additional circuit.
  • M
    Mrs. Susan MendozaAug 21, 2025
    What to do if my Kenmore 796.4139 Washer door will not unlock?
    • J
      Jacob GreenAug 21, 2025
      The Kenmore washer door has a safety feature. If the interior temperature is too high, for example, during a hot wash, the door will remain locked. Allow the washer to cool down until the DOOR LOCK indicator turns OFF. To drain the water, press POWER, then press the SPIN SPEED button without selecting a cycle.
  • M
    Mrs. Wendy Kennedy MDAug 23, 2025
    What to do if Kenmore Washer won't start or shows an error?
    • V
      velasquezrebeccaAug 23, 2025
      If your Kenmore washer won't start or shows an error, make sure the door is closed properly and press the START/PAUSE button. It may take a few moments for the drum to turn or spin. The washer will not operate unless the door is locked.
  • D
    dmullinsAug 26, 2025
    Why is my Kenmore Washer cycle time longer than usual?
    • C
      Christina BakerAug 26, 2025
      Your Kenmore washer automatically adjusts the wash time based on the amount of laundry, water pressure, water heating time, and other conditions. This is normal; the washer adjusts the cycle time to provide optimal results. The time displayed is an estimate, and the actual time may vary.
  • J
    Juan ClarkAug 27, 2025
    How to get rid of musty smell in my Kenmore 796.4139?
    • D
      David WilliamsAug 28, 2025
      To eliminate musty or mildew odors in your Kenmore washer, use only High-Efficiency detergent according to the manufacturer’s instructions. Regularly run the CLEAN WASHER cycle and wipe around and under the door seal frequently. Clean around the door seal/glass to prevent odor.
  • L
    Luis HernandezAug 30, 2025
    What to do if Kenmore 796.4139 Washer water drains slowly?
    • S
      Sandy RamseyAug 30, 2025
      If water drains slowly from your Kenmore washer, ensure the drain hose is free of clogs, kinks, and is not pinched. Clean the drain pump filter. Adjust or repair the drain if the drain discharge is more than 96 inches (244 cm) above the bottom of the washer. The maximum drain height is 96 inches (244 cm).
  • M
    Mindy WilliamsSep 1, 2025
    Why is my Kenmore 796.4139 Washer making a thumping sound?
    • S
      Stephanie ArcherSep 1, 2025
      A thumping sound in your Kenmore washer may be normal with heavy wash loads. It could also indicate the washer load is out of balance, especially when washing shoes or tightly tangled clothes. If the sound continues, stop the washer and redistribute the wash load. Pause the cycle and redistribute the load after the door unlocks.
  • M
    mbellSep 3, 2025
    Why is my Kenmore Washer making a rattling noise?
    • M
      Mary LewisSep 3, 2025
      Rattling and clanking noises in your Kenmore washer may be due to foreign objects like keys, coins, or safety pins in the drum or pump. Stop the washer and check the drum and drain for these objects. If the noise persists after restarting, call for service.
  • C
    Colleen JacksonSep 5, 2025
    What to do if my Kenmore 796.4139 Washer is wrinkling clothes?
    • A
      Alexander DiazSep 5, 2025
      To prevent wrinkling in your Kenmore washer, promptly remove items after the cycle is complete. Avoid overloading the drum; it should not be tightly packed, and the door should close easily. Check the inlet hose connections, as a hot water rinse can set wrinkles.
  • J
    Jessica JohnsonSep 7, 2025
    Why is my Kenmore 796.4139 Washer load too small or out of balance?
    • K
      Kyle VaughnSep 7, 2025
      If your Kenmore washer load is too small or out of balance, add 1 or 2 similar items to help balance the load. The washer will attempt to restart the spin cycle several times. If an imbalance is still detected, the washer will stop and display an error code.

Summary

Safety Information

Important Safety Instructions

Critical precautions for safe operation and preventing injury.

Grounding Requirements

Essential electrical grounding procedures for safe appliance installation and use.

Appliance Features and Benefits

Key Parts, Included, and Optional Accessories

Identification of major parts, supplied items, and available add-ons for the washer.

Installation Guide

Installation Requirements: Specifications, Location, Flooring, and Clearances

Critical dimensions, location, flooring, and clearance needs for proper setup.

Unpacking and Removing Shipping Bolts

Steps to safely remove packaging and prepare the washer for movement.

Connecting Water, Power, and Drain

Procedures for attaching water supply hoses, connecting power, and securing the drain hose.

Leveling and Stability Features

Steps to level the washer and install optional pads for stability.

How to Use Your Washer

Control Panel Features and Operation Basics

Explanation of the control panel, buttons, and basic operating steps.

Wash Cycles and Guide

Overview of available wash cycles, their settings, and fabric recommendations.

Sorting, Loading, and Detergent Use

Guidelines for preparing laundry, loading the drum, and using the dispenser correctly.

Display, Modifiers, and Special Functions

Understanding the display, adjusting settings, and using features like Clean Washer and Control Lock.

Care and Maintenance

Regular Cleaning and Mineral Buildup Removal

Routine cleaning for exterior/interior and methods for removing mineral deposits.

Dispenser, Filter, and Storage Procedures

Cleaning the dispenser, inlet/drain filters, and steps for storing the washer.

Troubleshooting Common Issues

Normal Sounds and Pre-Service Checks

Identifying expected noises and performing initial checks before calling for service.

Error Codes and Operational Problem Solutions

Solutions for specific error codes and operational problems like draining or filling.

Product Warranty Information

Kenmore Appliance Limited Warranty Details

Information on the one-year limited warranty coverage, terms, and exclusions.

Kenmore 796.4139 Series Specifications

General IconGeneral
BrandKenmore
Model Number796.4139 Series
Energy Star CertifiedYes
Sanitize CycleYes
Voltage120V
Frequency60 Hz
ColorWhite

Related product manuals