EasyManua.ls Logo

Kenmore 796.41393 - User Manual

Kenmore 796.41393
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Table of Contents

Questions and Answers

  • M
    Miss Amber Thompson DDSAug 19, 2025
    Why is my Kenmore Washer not turning ON?
    • A
      acostaamandaSep 12, 2025
      If your Kenmore Washer isn't turning on, ensure the power cord is securely plugged into a grounded, 3-prong, 120-VAC, 60-Hz outlet. Also, check your house fuse or circuit breaker. Reset the breaker or replace the fuse. If multiple appliances are on the same outlet causing an overload, consult an electrician to install an additional circuit.
  • P
    Peter CraigAug 21, 2025
    What to do if my Kenmore 796.41393 Washer door will not unlock?
    • C
      Cheryl RiceAug 21, 2025
      The Kenmore washer door has a safety feature. If the interior temperature is too high, for example, during a hot wash, the door will remain locked. Allow the washer to cool down until the DOOR LOCK indicator turns OFF. To drain the water, press POWER, then press the SPIN SPEED button without selecting a cycle.
  • J
    Julie SmithAug 23, 2025
    What to do if Kenmore Washer won't start or shows an error?
    • A
      Adam JonesAug 23, 2025
      If your Kenmore washer won't start or shows an error, make sure the door is closed properly and press the START/PAUSE button. It may take a few moments for the drum to turn or spin. The washer will not operate unless the door is locked.
  • M
    Martha MillerAug 26, 2025
    Why is my Kenmore 796.41393 cycle time longer than usual?
    • D
      ddiazAug 26, 2025
      Your Kenmore washer automatically adjusts the wash time based on the amount of laundry, water pressure, water heating time, and other conditions. This is normal; the washer adjusts the cycle time to provide optimal results. The time displayed is an estimate, and the actual time may vary.
  • L
    Lisa WrightAug 27, 2025
    How to get rid of musty smell in my Kenmore Washer?
    • J
      Jodi MyersAug 27, 2025
      To eliminate musty or mildew odors in your Kenmore washer, use only High-Efficiency detergent according to the manufacturer’s instructions. Regularly run the CLEAN WASHER cycle and wipe around and under the door seal frequently. Clean around the door seal/glass to prevent odor.
  • M
    Michael SmithAug 29, 2025
    What to do if Kenmore 796.41393 Washer water drains slowly?
    • A
      andrewmcdonaldAug 30, 2025
      If water drains slowly from your Kenmore washer, ensure the drain hose is free of clogs, kinks, and is not pinched. Clean the drain pump filter. Adjust or repair the drain if the drain discharge is more than 96 inches (244 cm) above the bottom of the washer. The maximum drain height is 96 inches (244 cm).
  • D
    denise35Sep 1, 2025
    Why is my Kenmore Washer making a thumping sound?
    • K
      Kimberly GarciaSep 1, 2025
      A thumping sound in your Kenmore washer may be normal with heavy wash loads. It could also indicate the washer load is out of balance, especially when washing shoes or tightly tangled clothes. If the sound continues, stop the washer and redistribute the wash load. Pause the cycle and redistribute the load after the door unlocks.
  • D
    David BrownSep 3, 2025
    Why is my Kenmore 796.41393 making a rattling noise?
    • S
      Stephen JenkinsSep 3, 2025
      Rattling and clanking noises in your Kenmore washer may be due to foreign objects like keys, coins, or safety pins in the drum or pump. Stop the washer and check the drum and drain for these objects. If the noise persists after restarting, call for service.
  • M
    Michelle CastroSep 5, 2025
    What to do if my Kenmore 796.41393 Washer is wrinkling clothes?
    • L
      Lisa HernandezSep 5, 2025
      To prevent wrinkling in your Kenmore washer, promptly remove items after the cycle is complete. Avoid overloading the drum; it should not be tightly packed, and the door should close easily. Check the inlet hose connections, as a hot water rinse can set wrinkles.
  • P
    pattersonpaulaSep 7, 2025
    Why is my Kenmore 796.41393 Washer load too small or out of balance?
    • K
      Kathy GonzalezSep 7, 2025
      If your Kenmore washer load is too small or out of balance, add 1 or 2 similar items to help balance the load. The washer will attempt to restart the spin cycle several times. If an imbalance is still detected, the washer will stop and display an error code.

Summary

Protection Agreements

Safety and Operation Guidelines

Important Safety Instructions

Crucial precautions for operating the appliance safely to prevent fire, shock, or injury.

Grounding Requirements

Essential instructions and warnings related to proper electrical grounding for appliance safety.

Installation Instructions

Unpacking and Removing Shipping Bolts

Step-by-step guide for safely unpacking the washer and removing shipping bolts.

Connecting Water Lines

Connecting Water Supply Hoses

Detailed instructions for connecting hot and cold water supply hoses to the washer.

Connecting Drain Hose and Power

Connecting the Drain Hose

Instructions for properly connecting the drain hose to a standpipe or laundry tub.

Using Your Washing Machine

Control Panel and Operation

Overview of the control panel features and basic steps to operate the washer.

Washer Maintenance

Drain Pump Filter Maintenance

Troubleshooting

Before Calling for Service

Steps to check before contacting service for common washer problems.

Error Code Diagnosis

Error Code Explanations

Explains common error codes displayed by the washer and their potential causes/solutions.

Kenmore 796.41393 Specifications

General IconGeneral
BrandKenmore
Model796.41393
CategoryWasher
LanguageEnglish

Related product manuals