33
Care & Cleaning (continued)
Replacing LED Lights (select
models)
The fresh food compartments of your
refrigerator may have LED lights. Always
use Sears Parts Direct for replacement.
To Replace LED Lights:
1. Unplug your refrigerator’s power
cord.
2. Remove light cover by pushing up
and out.
3. Hold the LED cover with one hand
and pull the connector with the other
hand while pressing the connector
latch.
4. Replace LED light and snap in place
assuring the light is facing in toward
the unit (inside fresh food).
Ordering Replacement LED Lights
Order new LEDs through the dealer where
you bought the refrigerator.
LED Light Harness Removal
LED Light Removal
NOTE
LED lights are in series so if one is bad
or unplugged, several lights may not
light up.
To Next Page
Loading...
Need help?
General
