12
To level the doors using the adjustable
lower hinge (select models):
1. Remove all food items from door bins
on door being adjusted.
2. Open doors to 90 degrees.
Installation (Continued)
NOTE
Adjustable hinge should only be used
after doors have been leveled with
rollers.
Flipper
Mullion
Screw
Flipper
Mullion
Hinge
Adjusting Flipper Mullion Screw
To adjust the ipper mullion:
1. Loosen the screw located on the
ipper mullion hinge.
2. Adjust ipper mullion height. For
proper connection with the ipper
mullion guide, there should be a
separation about the thickness of
a coin (0.060 inches, or 1.5 mm)
between the guide and ipper
mullion.
3. Re-tighten screw.
3. Lift the door while adjusting the
washer. To raise the door, rotate
washer clockwise (when viewed from
the bottom). To lower door, rotate
washer counter-clockwise (when
viewed from the bottom).
Flipper
Mullion
Mullion
Guide
Thickness
of a Coin
Adjusting Flipper Mullion Height
Hinge
Washer
Raise
Door
Lower
Door
Raising/Lowering Door
Open
Door
90
Degrees
Bottom of Door
To Next Page
Loading...
Need help?
General
