To Next Page

To Previous Page

F. SECURE DRAIN HOSE

Securing the drain hose properly will

protect your floors from damage due

to water leakage,

STEP 1. Move washer to its final

location.

If the water faucets and drain standpipe

are recessed, put hooked end of drain

hose in standpipe, Tightly wrap the

shipping strap around the drain hose

and water inlet hoses (not the handles

or stems). Push fastener into the

nearest hole in the shipping strap.

STEP 2. Locate the remaining piece

of shipping strap (not the end with the

cotter pins) from STEP 3 of "REMOVE

SHIPPING STRAR" Use it to wrap the

drain hose together with the laundry tub

or standpipe, Push fastener into the

nearest hole in the shipping strap.

Fastener

Kenmore Automatic Washers User Manual

Questions and Answers: