- 10 -
ASSEMBLY INSTRUCTIONS
WARNING
Personal Injury and Product Damage Hazard
• ALWAYS turn off the vacuum cleaner before unplugging.
• The cord moves rapidly when rewinding. Keep children away and provide a clear
path when rewinding the cord to prevent personal injury.
• DO NOT use outlets above counters. Damage from cord to items in surrounding area
could occur.
• When any abnormality/failure occurs, stop using the product immediately and
disconnect the power plug.
OPERATING INSTRUCTIONS
HOW TO START
HOSE
To install: Line up the hose latch tab with
the notch in the canister hood, and insert
hose into canister until it snaps into place.
IMPORTANT
: Push hose firmly into the
canister until the hose latch tab snaps into
place. The vacuum cleaner will not operate
until hose is fully connected.
To remove: Do not open hood before
removing hose. With hood closed, press
the hose latch tab in to release and remove
hose.
CANISTER
1. Open the canister hood.
2. Check to see that the dust bag
is properly installed. See DUST
BAG CHANGING (page 18-19) for
instructions.
3. Check to see that the motor safety
filter is properly installed. See MOTOR
SAFETY FILTER CLEANING (page 19-20)
for instructions.
To Next Page
Loading...
Need help?
General
