- 12 -
NOTE
: This 3-way On/Off switch
can also be fitted with a PowerMate
®
motorized nozzle, which is sold separately.
When using the PowerMate
®
:
Slide the switch forward to the CARPET
position to turn on suction from the canister
motor and the PowerMate
®
brushroll. The
CARPET indicator button will turn green,
and the PowerMate
®
brushroll will start to
spin.
HOW TO START
VACUUMING TIPS
FOR BEST CLEANING RESULTS
• Slide suction control toward HIGH to
increase suction for carpets, and bare
floors.
• Slide suction control towards LOW
POWER to decrease suction for
lightweight rugs or drapes.
High
Low power
Increase
Suction
Decrease
Suction
upholsteries, carpets,
and bare floors.
Decrease suction for
draperies and
• Keep the airflow passage open. Check
each assembly area in REMOVING
CLOGS (page 17) occasionally for clogs.
Turn off and unplug vacuum cleaner
from outlet before checking.
SUGGESTED SWEEPING PATTERN
For best cleaning action, the floor nozzle
should be pushed straight away from you
and pulled straight back. At the end of
each pull stroke, the direction of the floor
nozzle should be changed to point into the
next section to be cleaned. This pattern
should be continued across the carpet with
slow, gliding motions.
NOTE
: Fast, jerky strokes do not provide
complete cleaning.
FLOOR NOZZLE STORAGE
The wand has a “U” shaped storage hook
that slides into the “U” shaped slot on
the canister. The storage hook allows the
wands and floor nozzle to be stored with
the canister to conserve storage space.
The canister must be stored on end for this
feature to be used.
Storage
Hook
Slot
Slide the switch forward to the FLOOR
position to turn on canister motor suction
only. The FLOOR indicator button will
turn green, and the PowerMate brushroll
will not spin.Slide the switch all the way
back to turn the vacuum cleaner off. The
CARPET and FLOOR indicators will both
become gray.
To Next Page
Loading...
Need help?
General
