- 10 -
NOTE:
To reduce the risk of electric shock,
this vacuum cleaner has a polarized plug;
CANISTER
1. Open the canister hood.
2. Check to see that the dust bag is
properly installed. See
DUST
BAG
CHANGING
(page 17) for instructions.
ASSEMBLY INSTRUCTIONS
3. Check to see that the motor safety
filter is properly installed. See
MOTOR
SAFETY FILTER CLEANING
(page 18) for
instructions.
CAUTION
Moving parts! To reduce the risk of personal injury, DO NOT
touch the brushroll when vacuum cleaner is on. Contacting
the brushroll while it is rotating can cut, bruise or cause other
injuries. Always turn off and unplug from electrical outlet
before servicing. Use caution when operating near children.
OPERATING INSTRUCTIONS
HOW TO START
WARNING
Personal Injury and Product Damage
Hazard
• ALWAYS turn off the vacuum cleaner
before unplugging.
• The cord moves rapidly when
rewinding. Keep children away and
provide a clear path when rewinding
the cord to prevent personal injury.
• DO NOT use outlets above counters.
Damage from cord to items in
surrounding area could occur.
• When any abnormality/ failure occurs,
stop using the product immediately
and disconnect the power plug.
WARNING
Personal Injury and Product Damage
Hazard
• DO NOT run over power cord with
PowerMate
®
. Personal injury or product
damage could result.
• DO NOT pull plug from wall by the
power cord. If there is damage to
the cord or plug, personal injury or
property damage could result.
one blade is wider than the other. This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. Do not change the plug in
any way.
To Next Page
Loading...
Need help?
General
