- 23 -
Vacuum cleaner picks 1. Wrong pile height setting. 1. Adjust setting.
up moveable rugs -or- 2. Suction too strong. 2. Reduce suction by turning suction
control on handle base to open
airflow hole.
PowerMate
®
pushes too
hard.
Cord won’t rewind. 1. Dirty power cord. 1. Clean the power cord.
2. Cord jammed.
2. Pull out cord and rewind.
Vacuum cleaner leaves
marks on carpet.
1. Wrong vacuuming pattern.
1. See VACUUMING TIPS (page 11).
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
To Next Page
Loading...
