Turn the cycle selector in either direction to the cycle desired.
To change the cycle once it has begun, press the Pause/
Cancel button twice before selecting a new cycle. Just
turning the cycle selector knob to another selection will not
change the cycle. If the selection is changed after the cycle
starts, the indicator lights will blink, and the signal will beep.
The signal will beep and the status lights will fl ash, but the
original cycle will continue.
7
This manual covers many models and not all cycles, options, or features listed are available on
every model. Consoles shown above for reference only. Your model may differ.
OPERATING INSTRUCTIONS
Cycle Selection
C4906
C4907
C4917
Follow the fabric care label
instructions on items to be
washed.
For best results
= color number
To Next Page
Loading...
Need help?
General